Nerd Culture

First of all, I’m going to assume you already have httpd and php installed. If you don’t have them already you should install them now. I recommend Jason Litka’s Yum Repository.

This guide is written with bash comments, so the whole text block below can be copied and pasted into an install.sh file if you’d rather not go through step by step. I wouldn’t recommend it though, as something could always go wrong, and it could be challenging hunting down the problem in that massive wall of output lines!

#!/bin/bash
# Mplayer Codecs
# Switch to working directory
cd /usr/local/src

# Download the codec files needed 
wget http://www3.mplayerhq.hu/MPlayer/releases/codecs/essential-amd64-20071007.tar.bz2

# Extract the codec files 
bunzip2 essential-amd64-20071007.tar.bz2; tar xvf essential-amd64-20071007.tar

# Create a directory for the codecs & import them 
mkdir /usr/local/lib/codecs/ 
mv essential-amd64-20071007/* /usr/local/lib/codecs/ 
chmod -R 755 /usr/local/lib/codecs

# FLVTool2
# Switch to working directory
cd /usr/local/src

# Download the source files needed 
wget http://rubyforge.org/frs/download.php/17497/flvtool2-1.0.6.tgz

# Extract the Source files 
tar zxvf flvtool2-1.0.6.tgz 

# Compile
cd /usr/local/src/flvtool2-1.0.6
ruby setup.rb config 
ruby setup.rb setup 
ruby setup.rb install

# LAME MP3 Encoder
# Switch to working directory
cd /usr/local/src

# Download the source files needed 
wget http://downloads.sourceforge.net/lame/lame-398-2.tar.gz

# Extract the Source files 
tar zxvf lame-398-2.tar.gz 

# Compile
cd /usr/local/src/lame-398-2
./configure 
make && make install

# libOGG
# Switch to working directory
cd /usr/local/src

# Download the source files needed 
wget http://downloads.xiph.org/releases/ogg/libogg-1.1.4rc1.tar.gz

# Extract the Source files 
tar zxvf libogg-1.1.4rc1.tar.gz 

# Compile
cd /usr/local/src/libogg-1.1.4rc1
./configure 
make && make install

# libVorbis
# Switch to working directory
cd /usr/local/src

# Download the source files needed 
wget http://downloads.xiph.org/releases/vorbis/libvorbis-1.2.3.tar.gz

# Extract the Source files 
tar zxvf libvorbis-1.2.3.tar.gz

# Compile
cd /usr/local/src/libvorbis-1.2.3
./configure 
make && make install

# liba52
# Switch to working directory
cd /usr/local/src

# Download the source files needed 
wget http://liba52.sourceforge.net/files/a52dec-0.7.4.tar.gz

# Extract the Source files 
tar zxvf a52dec-0.7.4.tar.gz

# Compile
cd /usr/local/src/a52dec-0.7.4
./configure --enable-shared=PKGS
make && make install

# libFAAD2
# Switch to working directory
cd /usr/local/src

# Download the source files needed 
wget http://downloads.sourceforge.net/faac/faad2-2.7.tar.gz

# Extract the Source files 
tar zxvf faad2-2.7.tar.gz

# Compile
cd /usr/local/src/faad2-2.7
autoreconf -vif
./configure --disable-drm --disable-mpeg4ip
make && make install

# libFAAC
# Switch to working directory
cd /usr/local/src

# Download the source files needed 
wget http://downloads.sourceforge.net/faac/faac-1.28.tar.gz

# Extract the Source files 
tar zxvf faac-1.28.tar.gz

# Compile
cd /usr/local/src/faac-1.28
./bootstrap
./configure --disable-mp4v2
make && make install

# YASM (required by x264)
# Switch to working directory
cd /usr/local/src

# Download the source files needed 
wget http://www.tortall.net/projects/yasm/releases/yasm-0.7.0.tar.gz

# Extract the Source files 
tar zxvf yasm-0.7.0.tar.gz

# Compile
cd /usr/local/src/yasm-0.7.0
./configure
make && make install

# x264 daily snapshot
# Switch to working directory
cd /usr/local/src

# Download the source files needed 
wget http://download.videolan.org/pub/videolan/x264/snapshots/x264-snapshot-20090901-2245.tar.bz2

# Extract the Source files 
bzip2 -d x264-snapshot-20090901-2245.tar.bz2; tar xvf x264-snapshot-20090901-2245.tar

# Compile
cd /usr/local/src/x264-snapshot-20090901-2245
./configure --enable-mp4-output --enable-shared --enable-pthread
make && make install

# XVID
# Switch to working directory
cd /usr/local/src

# Download the source files needed 
wget http://downloads.xvid.org/downloads/xvidcore-1.2.2.tar.gz

# Extract the Source files 
tar zxvf xvidcore-1.2.2.tar.gz

# Compile
cd /usr/local/src/xvidcore/build/generic
./configure
make && make install

# Install SVN/Ruby 
yum install -y subversion ruby ncurses-devel

# Fix few Lib issues for next steps 
echo "/usr/local/lib" >> /etc/ld.so.conf 
ldconfig -v

# MPlayer Core
# Switch to working directory
cd /usr/local/src

# Get the latest version from the subversion 
svn checkout svn://svn.mplayerhq.hu/mplayer/trunk mplayer

# Compile
cd /usr/local/src/mplayer 
./configure 
make && make install

# FFMPEG 
# Switch to working directory
cd /usr/local/src

# Get the latest version from the subversion 
svn checkout svn://svn.mplayerhq.hu/ffmpeg/trunk ffmpeg 

# Compile
cd /usr/local/src/ffmpeg 
./configure --enable-gpl  --enable-postproc --enable-nonfree --enable-postproc --enable-libfaad --enable-avfilter --enable-pthreads --enable-libxvid --enable-libx264 --enable-libmp3lame --enable-libfaac --disable-ffserver --disable-ffplay --enable-shared
echo '#define HAVE_LRINTF 1' >> config.h 
make && make install

# Finalize the codec setups 
ln -s /usr/local/lib/libavformat.so.50 /usr/lib/libavformat.so.50 
ln -s /usr/local/lib/libavcodec.so.51 /usr/lib/libavcodec.so.51 
ln -s /usr/local/lib/libavutil.so.49 /usr/lib/libavutil.so.49 
ln -s /usr/local/lib/libmp3lame.so.0 /usr/lib/libmp3lame.so.0 
ln -s /usr/local/lib/libavformat.so.51 /usr/lib/libavformat.so.51

# Few tasks before compiling FFMPEG-PHP 
yum install -y automake autoconf libtool

# FFmpeg-php
# Switch to working directory
cd /usr/local/src

# Download the source files needed 
wget http://downloads.sourceforge.net/ffmpeg-php/ffmpeg-php-0.6.0.tbz2

# Extract the Source files 
bunzip2 ffmpeg-php-0.6.0.tbz2; tar xvf ffmpeg-php-0.6.0.tar 

# Compile
cd /usr/local/src/ffmpeg-php-0.6.0 
phpize 
./configure 
make 
make install

# Add FFMPEG-PHP as an extension of PHP 
# Add this line to your php.ini file (Check the correct path of php.ini) 
echo "extension=ffmpeg.so" >> /etc/php.ini

# Restart Apache to load FFMPEG-PHP 
service httpd restart

# Cleanup
cd ..
rm -f -r ./ffmpeg-php

Wow! That was long…glad that’s over. Anyway, you should check and make sure it worked by running phpinfo() in php and searching for a block called ‘ffmpeg’. If anyone has any suggestions for improvements to the script or other encoders I should add let me know.

Be Sociable, Share!

•